White 415 User's Guide download pdf (Page 3)

Thank you for purchasing a quality Mira product. To enjoy the full potential of your new

product, please take time to read this guide thoroughly, having done so, keep it handy for

future reference.

The Mira CombiForce 415 is a pressure balanced shower control which maintains a

constant outlet temperature irrespective of changes in inlet pressures as long as the

inlet water temperatures remain the same. It is not a thermostatic shower control and

does not sense supply temperature variations. Therefore, inlet water temperatures

especially the hot, should remain relatively constant.

The Mira CombiForce 415 can be installed with the following packages:

- Fully modulating multipoint gas water heaters.

- Fully modulating combination boilers.

- Unvented mains pressure systems.

- Mains pressurised, instantaneous hot water heated from thermal store, systems.

- Pumped systems.

Showering temperature is adjusted by the shower control. The flow rate is determined by

the supply pressures available at the inlets, and the output rating of the heater appliance.

Shower controls covered by this guide:

Mira CombiForce 415

Surface mounted pressure balanced shower control for connection to exposed pipework,

for high pressure applications (1.0 – 5.0 bar). Available in white/chrome, white/light

golden or all chrome finish.

Mira CombiForce 415B

Built-in shower control for connection to concealed pipework, for high pressure

applications (1.0 – 5.0 bar). Available in white, white/chrome, white/light golden or all

chrome finish.

Introduction

Section

If you experience any difficulty with the installation or operation of your new

shower control, then please refer to Section 10, "Fault Diagnosis", before

contacting Kohler Mira Limited. Our telephone and fax numbers can be found on

the back cover of this guide.

1 2 3 4 5 6 7 8 ... 51 52

No comments

White 415 User's Guide Page 3