White W480 User's Guide download pdf (Page 166)

58 Too many trays attached

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.

3 Remove the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

59 Incompatible tray <x>

Only options designed specifically for this printer are supported.

Try one or more of the following:

• Remove the specified tray.

• Press the up or down arrow button until Continue appears, and then press to clear the message and continue

printing without using the specified tray.

61 Remove defective hard disk

• Press the up or down arrow button until Continue appears, and then press to clear the message and continue

printing.

• Install a different hard disk before performing any operations that require a hard disk.

62 Disk full

• Press the up or down arrow button until Continue appears, and then press to clear the message and continue

processing.

• Delete fonts, macros, and other data stored on the hard disk.

• Install a larger hard disk.

63 Unformatted disk

• Press the up or down arrow button until Continue appears, and then press to clear the message and continue

printing.

• Format the disk.

If the error message remains, the hard disk may be defective and require replacing.

80.xx Fuser near life warning

• Press the up or down arrow button until Continue appears, and then press to clear the message and continue

printing.

• Order a replacement fuser immediately. When print quality is reduced, install the new fuser using the instruction

sheet that came with the replacement part.

Troubleshooting 166

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 212 213

Comments to this Manuals

No comments