White WW200 Owner's Manual download pdf (Page 39)

37-EN

01GB06IVAW200.fm

ALPINE IVA-W200 68-04123Z67-A (EN)

Visual EQ Setting Operation

Touch [SETUP] on the main source screen.

The SETUP selection screen is displayed.

Touch [i-Personalize].

The i-Personalize setup screen appears.

Touch [] of VISUAL EQ.

VISUAL EQ screen appears.

Select a desired setting item by touching [] or [].

Setting items:

VISUAL EQ* BRIGHT COLOR* TINT* CONTRAST

SHARP* USER MEMORY*

* The setting is available in the visual source mode. (except navigation

screen)

Change the setting on the selected item by touching

its [] or [].

Touch [RETURN] to return to the previous screen.

Touch [CONTROL] to return to the main source screen that

was displayed before the setup operation was started.

You can select a mode suitable for the subject image.

Setting item: VISUAL EQ

Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /

CONTRAST / P-1 / P-2

• To return to the initial setting after selecting any one of the setting

contents (NIGHT M. to CONTRAST) and adjusting a desired

brightness, picture tint, etc., set this function to OFF.

• If your desired brightness, picture tint, etc., are adjusted after

selecting any one of the setting contents (NIGHT M. to CONTRAST),

“CUSTOM” is displayed.

Setting item: BRIGHT

Setting content: -15 ~ +15

You can adjust the brightness between MIN (–15) and MAX

(+15). When it reaches the minimum or maximum point, the

display shows “MIN” or “MAX” respectively.

• When any NIGHT M. to CONTRAST setting item is selected, the

brightness is automatically adjusted according to the car's interior

brightness if AUTO is set in “Setting the Brightness of the

Backlighting” (page 36).

Setting item: COLOR

Setting content: -15 ~ +15

You can adjust the color between MIN (–15) and MAX (+15).

When it reaches the minimum or maximum point, the display

shows “MIN” or “MAX” respectively.

• Color adjustment can be made only in the navigation, DVD, Video

CD, AUX modes.

• Color adjustment cannot be made if a Navigation system with the

RGB feature is connected.

i-Personalize™

VISUAL EQ™

To display the i-Personalize mode screen:

To watch a video source, your vehicle must be parked with the

ignition key in the ACC or ON position. To do this, follow the

procedure below.

1 Bring your vehicle to a complete stop at a safe

location. Engage the parking brake.

2 Keep pushing the foot brake and release the parking

brake once then engage it again.

3 When the parking brake is engaged for the second

time, release the foot brake.

• For automatic transmission vehicles, place the transmission lever

in the Park position.

Now, the locking system for the i-Personalize mode operation has

been released. Engaging the parking brake can reactivate the i-

Personalize mode, as long as the car's ignition has not been

turned off. It is not necessary to repeat the above procedure (1

through 3) of “To display the i-Personalize mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To

display the i-Personalize mode screen.”

The following steps 1 to 6 are common operations to each

“Setting item” of VISUAL EQ setting. Refer to each section for

details

Selecting the VISUAL EQ Mode (Maker’s

setting)

OFF (FLAT): Initial Setting

NIGHT M.: Suitable for movies in which dark scenes

frequently appear.

SOFT: Suitable for CGs and animated films.

SHARP: Suitable for old movies where images are not

clearly shown.

CONTRAST: Suitable for recent movies.

P-1: Recalls the VISUAL EQ mode being stored on

preset No.P-1 from “Storing VISUAL EQ”

(page 38).

P-2: Recalls the VISUAL EQ mode being saved on

preset No.P-2 from “Storing VISUAL EQ”

(page 38).

Adjusting Brightness

Adjusting Color of Picture

01GB00IVAW200.book Page 37 Tuesday, December 20, 2005 11:41 AM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 76 77

Comments to this Manuals

No comments

White WW200 Owner's Manual Page 39

Comments to this Manuals

Related products and manuals for Sewing machines White WW200